DeLong’s skinning rollers have a unique, patented design to skin poultry necks and thighs with maximum efficiency. We manufacture these rollers to meet or exceed USDA approval codes, in a variety of lengths, constructed of stainless steel, and hardened stainless steel. Neck and thigh skinning rollers are available for all machines, old and new.
Neck and Thigh Skinning Rollers
Note: Use the guide above and table below to ensure the proper measurements.
A: Peel Length
B: Peel Diameter (bushings)
C: Shaft Length (drive)
D: Shaft Diameter (bushing)
| OEM | DeLong’s Part Number |
Peel Length (A) |
Peel Diameter (B) |
Shaft Length (Drive) (C) |
Shaft Diameter (Bushing) (D) |
Drive Shafts on Both Ends |
Reverse Gear on End of Peel |
|---|---|---|---|---|---|---|---|
| Globe Machine Co. – Thigh Skinner | 8200R | 18 1/8 in. | 2 & 1-1/4 in. | 4.50 in. | 7/8 in. |  |
|
| Globe Machine Co. – Thigh Skinner | 8400 | 24 in. | 2 in. | 4.50 in. | 7/8 in. | |
|
| — | H1205 | 15.75 in. | 1 7/8 in. | 4 in. | 1 in. | |
|
| Gainco – Neck Skinner | H1210 | 28 1/2 in. | 1 7/8 in. | 4 in. | 1 in. | |
|
| — | H1212 | 28 1/2 in. | 1 7/8 in. | 5 in. | 1 in. | |
|
| D&F, Lewis, Centennial | H1215 | 28 1/2 in. | 1 7/8 in. | 4 in. | 1 in. | |
|
| — | H1220 | 28 1/2 in. | 1 7/8 in. | 4 in. | 1 in. | |
|
| DeLong’s Gizzard Equipment – Neck | H1225 | 29 1/4 in. | 1 7/8 in. | 5.50 in. | 1 in. | |
|
| DeLong’s Gizzard Equipment – Neck | H1229 | 29 7/8 in. | 1 7/8 in. | 5.50 in. | 1 in. | |
|
| Prime Equipment Group – Harvestor | H1274 | 29 1/4 in. | 1 7/8 in. (Tapered) | 5.75 in. | 1 in. | |
|
| — | H1290 | 27 1/4 in. | 1 7/8 in. | 5.50 in. | 1 in. | |
|
| Cantrell Machine | H1292 | 27 1/4 in. | 1 7/8 in. | 6 in. | 1 in. | ||
| Cantrell Machine | H1575 | 31 1/4 in. | 1.816 in. | 5.50 in. | 1 in. | |
|
| Diversified / DMP – Neck Skinner | S1418 | 18 in. | 1.60 in. | 6 in. | 1 in. | ||
| Cantrell – Neck Skinner | S1423 | 24 in. | 1.625 in. | 5.25 in. | 1 in. | ||
| Cantrell – Heart/Liver Separator | S1830 | 22 7/8 in. | 1 3/4in. | 6 in. | 3/4 in. | ||
| — | S1835 | 28 in. | 1 3/4 in. | 4 in. | 3/4 in. | |
|
| — | S1840 | 28 in. | 1 3/4 in. | 4 in. | 1 in. | |
|
| — | S1845 | 28 in. | 1 3/4 in. | 1 in. | 1 in. | ||
| Lewis | S2047 | 14 in. | 2 in. | 4 in. | 3/4 in. | ||
| — | S3045 | 28 in. | 1 3/4 in. | 4 in. | 3/4 in. | |
|
| — | S3050 | 21 in. | 1 3/4 in. | 7.50 in. | 1 in. | |
|
| — | S3528 | 24.125 in. | 3 in. | 6 in. | 1 in. | |
Bushings
DeLong’s recommends replacing your brass bushings every time you replace your poultry rollers. DeLong’s stocks all sizes for the end block application.
New brass bushings are always recommended when replacing any rollers. Bushings effect a rollers performance tremendously. Bad bushing can cause a good roller to perform poorly. DeLong’s stocks all sizes of bushings for any end block application.
