DeLong’s breast cleaning rollers have unique, patented designs to perform specific removal of membranes and skin on poultry breasts with precision and speed. We manufacture these rollers to meet or exceed USDA approval codes, in a variety of lengths, constructed of stainless steel, and hardened stainless steel. Breast cleaning rollers are available for all machines, old and new.
Breast Cleaning Rollers
Note: Use the guide above and table below to ensure the proper measurements.
A: Peel Length
B: Peel Diameter (bushings)
C: Shaft Length (drive)
D: Shaft Diameter (bushing)
| OEM | DeLong’s Part Number |
Peel Length (A) |
Peel Diameter (B) |
Shaft Length (Drive) (C) |
Shaft Diameter (Bushing) (D) |
Drive Shafts on Both Ends |
Reverse Gear on End of Peel |
|---|---|---|---|---|---|---|---|
| DeLong’s | 0067DRA | 16 in. | 7/8 in. | 3.25 in. | 5/8 in. |  |
|
| DeLong’s | 0067R | 12 in. | 7/8 in. | 3.25 in. | 5/8 in. | |
|
| DeLong’s | 0067RA | 16 in. | 7/8 in. | 3.25 in. | 5/8 in. | |
|
| Prime Equipment Group | 1040 | 16 in. | 1.025 in. | 3.25 in. | 5/8 in. | ||
| Prime Equipment Group | 4220 | 20 in. | 1.25 in. | 3.375 in. | 5/8 in. | ||
| Prime Equipment Group | 1040 | 20 in. | 1.25 in. | 4 in. | 3.4 in. | |
| DeLong’s Part Number | Description |
|---|---|
| 3218 RSSH | 1.125” x 18″ Peeler with Rev Gear Stainless, Hardened |
| 3218 RFSSH | 1.125” x 18″ Rev. w/Flats in Peel – Stainless, Hardened |
| 3218 DW SS | 18″ X 1.25″ Peeler Double Drive with Unloader – Stainless |
| 4218SFSSH | 18″ X 1.25″ Skinning Rollers with Flats, Stainless, Hardened |
| 4218RFB | 18″ X 1.25″ Skinning Roller w/ Rev & Flats on Rev Gear |
| 4218 W SS | 18″ X 1.25″ Skinning Roller with Unloaders Stainless Steel |
Bushings
DeLong’s recommends replacing your brass bushings every time you replace your poultry rollers. DeLong’s stocks all sizes for the end block application.
New brass bushings are always recommended when replacing any rollers. Bushings effect a rollers performance tremendously. Bad bushing can cause a good roller to perform poorly. DeLong’s stocks all sizes of bushings for any end block application.
| DeLong’s Part Number | Description |
|---|---|
| 0045AS | 1/2″ flange bushings |
| 0067AS | 5/8″ flange bushings |
| FL5210 | 1/2″ flange bushings |
| 019AS | 3/4″ Flange Bushing |
| EB1″ | 1″ Flange Bushing |
| FB42 | 3/4″ ID X 1″ OD X 1-1/4″ Flange Bushing |
| 013AS | 16mm Sleeve Bushing |
| 013BF | 16mm Flange Bushing |
| FB47 | ¾” Flange Bushing |
| 500AS | 17mm Flange Bushing |
| EB78 | 7/8″ X 1″ Flange Bushing |